 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NTE1206 Integrated Circuit Phase Lock Loop (PLL) Stereo Decoder Features: D Requires No Inductors D Low External Part Count D Only Oscillator Frequency Adjustment Necessary D Integral Stereo/Monaural Switch 75mA Lamp Driving Capability D Wide Dynamic Range: Typically up to 1.3V(RMS) Composite Input Signal D Wide Supply Voltage: 8V to 16V D Excellent Channel Separation Maintained Over Entire Audio Frequency Range D Low Distortion: Typically 0.15% THD at 560mV(RMS) Composite Input Signal D Excellent SCA Rejection Absolute Maximum Ratings: (TA = +25C unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16V Lamp Voltage, VLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V Lamp Current, (Note 1), ILAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75mA Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625mW Derated Above 25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mW/C Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25 to +75C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 to +150C Note 1. Not exceed indicator lamp current 60mA when used at VCC = 14V to 16V. Electrical Characteristics: (VCC = 12V, fM = 1kHz, TA = +25C unless otherwise specified) Parameter Supply Voltage Current Drain Max. Comp. Input Voltage Max. Mono Input Voltage Input Resistance Symbol VCC ICC VIN Max (Stereo) VIN Max (Stereo) RIN At Lamp OFF THD = 0.5%, L + R = 90%, P = 10% THD = 1%, f = 1kHz Test Conditions Min 8 - - - - Typ 12 13 1.3 1.3 50 Max Unit 16 - - - - V mA V V k Electrical Characteristics (Cont'd): (VCC = 12V, fM = 1kHz, TA = +25C unless otherwise specified) Parameter Separation Symbol Sep Test Conditions P = 56mV, L + R = 504mV f = 100Hz f = 1kHz f = 10kHz Total Harmonic Distortion THD (Stereo) P 56mV, L + R = 504mV f = 100Hz f = 1kHz f = 10kHz Voltage Gain Channel Balance Total Harmonic Distortion Carrier Leak GV CB VIN = 560mV (Standard) VIN = 560mV Min - 30 - - - - Typ 38 40 38 0.25 0.15 0.3 Max Unit - - - - - - dB dB dB % % % dB dB % dB dB dB mV dB % dB -7.5 -5.0 -2.5 - - - - - 12 - - - 0.2 0.15 35 45 75 16 6 3 76 1.5 0.7 - - - 20 - - - THD VIN = 560mV, f = 1kHz (Monaural) CL f = 19kHz P = 56mV, L + R = 504mV (Standard) f = 38khz P = 56mV, L + R = 448mV (Standard), SCA = 56mV, fSCA = 67kHz Pilot Input Lamp Turn OFF to Turn ON P = 56mV VIN = 560mV (Standard), Rg = 4k SCA Rejection Lamp ON Sensitivity Hysteresis Capture Range Signal-to-Noise Ratio SCA Rej. VL(ON) VH CR S/N Pin Connection Diagram VCC 1 Input 2 Amp Output 3 Lt Output 4 Rt Output 5 Pilot Lamp 6 GND 7 14 OSC Tuning 13 Filter Network 12 Filter Network 11 Phase Detector Input 10 19kHz Output 9 Filter Network 8 Filter Network 14 8 1 .827 (21.0) Max 7 .300 (7.62) .197 (5.0) Max .100 (2.45) .600 (15.24) .099 (2.5) Min |
Price & Availability of NTE1206
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |